Power Series Calculator
Radius and interval of convergence, endpoint tests and series sums with step-by-step solutions
Radius and Interval of Convergence
A power series centred at is
and the question is always the same: for which does it converge? The answer is always an interval centred on , of half-width , the radius of convergence.
Get from the ratio test. Form
and demand . Three outcomes:
- тАФ converges only at (e.g. )
- тАФ converges on , diverges outside
- тАФ converges for every real (e.g. )
The assumption people forget: the ratio test says nothing at , because there exactly. The two endpoints must be tested separately, and they can behave differently from each other.
Testing the Endpoints
Substituting an endpoint turns the power series into an ordinary numerical series, and two standard results usually settle it.
p-series:
So converges and тАФ the harmonic series, тАФ diverges, marginally but definitely.
Alternating series test: converges if decreases monotonically to zero. This is why converges while does not; the first is conditionally convergent.
Geometric series, worth recognising instantly:
When it applies: the geometric sum formula needs strictly; at the terms do not shrink and the series diverges by the th term test.
Common Mistakes to Avoid
- Reporting an open interval without checking the endpoints тАФ half the marks on a typical exam question live there.
- Assuming both endpoints behave the same way тАФ converges at one end and diverges at the other.
- Confusing -series with geometric тАФ has in the base, has in the exponent. They converge under completely different conditions.
- Thinking proves convergence тАФ the harmonic series is the standing counterexample. The th term test can only prove divergence.
- Dropping the absolute values in the ratio test тАФ the limit is of a modulus.
- Forgetting the centre тАФ the interval is centred at , not at , so a radius of about gives .
Examples
Frequently Asked Questions
Apply the ratio test to |aтВЩтВКтВБ(xтИТc)тБ┐тБ║┬╣ / aтВЩ(xтИТc)тБ┐|, take the limit as n тЖТ тИЮ, and set it less than 1. Solving that inequality gives |x тИТ c| < R, and R is the radius. If the limit is 0 the radius is infinite; if it is infinite for every x тЙа c the radius is 0.
Because at |x тИТ c| = R the ratio-test limit equals 1, and the test is inconclusive there. Substitute each endpoint to get a numerical series and apply a p-series, alternating series or comparison test. The two endpoints often give different answers.
The series ╬г 1/nс╡Ц converges when p > 1 and diverges when p тЙд 1. The boundary case p = 1 is the harmonic series, which diverges even though its terms go to zero тАФ the classic warning against the nth term test being used as a convergence proof.
A series converges absolutely if ╬г|aтВЩ| converges, and conditionally if ╬гaтВЩ converges but ╬г|aтВЩ| does not. ╬г(тИТ1)тБ┐/n is conditionally convergent. Inside its radius of convergence a power series always converges absolutely; conditional convergence only ever shows up at an endpoint.
Related Solvers
Try AI-Math for Free
Get step-by-step solutions to any math problem. Upload a photo or type your question.
Start Solving